Filter By:
- Parts & Accessories (137)
- Tires (1047)
- Tubes: All Sizes/Types (264)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tires/Tubes
Overwhelmed by choice? We’ve been there ….
Here at College Street Cycles we’ve tested out and approved all the brands of tube and tire we carry. While we have some strong preferences, no matter what specific need you’re trying to meet, we can offer guidance and install them for you to guarantee you have the right fit. Call or email us to get an opinion, or stop by the store with your bike.
Before the Pika, gaining traction on gravel roads was a true feat. Now, it’s child’s play. Ramped center knobs roll fast on loose gravel, and U-shaped shoulder knobs dig in on the turns. The Pika is equipped with dual compound tread, EPS protection, and wire bead.
- Inverted tread design and knurled tread surface are low profile and fast rolling without sacrificing traction
- Front and Rear application
- Lighter and faster than the original
- Control and predictability of the original but with less rolling resistance and weight
- Front and Rear application
- Create an air tight seal for BST rims
- Can also be used as a lightweight rim strip for any rim
- Handlebar-mounted tubeless repair kit
- Discreet and neat finish, completely integrated inside the handlebar
- Anodized aluminum bar ends
- Tool-less expansion plugs fit internal bar diameters from 17.5mm to 21mm
- Easy to use: No need to dismount the tire
- Durable reparation of flats between 1 and 5mm
- Integrated holder for an additional chain link and a tubeless valve (link and valve not included)
- Includes tubeless plugs (3 x 2mm and 3 x 5mm), needle tool (reamer) and knife
- Weight: 75g
$2.99
Patch up punctures in your bike tires with Slime's peel and stick SKABS. No glue means no mess! These SKABS are quick and easy to apply, and come in a compact storage container. Just toss them into your bike bag.
- Kit contains (6) pre-glued 1? patches and a scuffer.
$3.99
Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.
$4.19
- Butyl rubber
- Removable valve core
- Schrader valve
- Wall thickness: 0.9mm
$4.19
- Butyl rubber
- Economy tube
- Schrader valve
- Wall thickness: 0.9mm
$4.79 - $14.39
- Butyl rubber
- Removable valve core
- Schrader valve
- Wall thickness: 0.9mm
$4.79
- Butyl rubber
- Economy tube
- Schrader valve
- Removable valve core
- Wall thickness: 0.9mm
$4.99
- Includes 6 self-adhesive patches (25mm) and sand paper to scuff the tube surface for proper adhesion
- Suitable for all kinds of punctures
- Convenient plastic case is compact and easy to carry on every ride
- No glue needed
$4.99
Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher-quality tube will always last longer than a cheap tube during comparable everyday use.
$4.99 - $14.79
- Valve type: Schrader
- Valve core: Removable
- Valve stem: Smooth
- Butyl rubber
- Wall thickness: 0.9mm
$4.99
- Butyl rubber
- Economy tube
- Wall thickness: 0.9mm
- Removable valve core
$4.99 - $14.39
- Butyl rubber
- Economy tube
- Removable valve core
- Wall thickness: 0.9mm
$5.00
- The Pressure Relief Valve Stem Nut has been designed to ensure that an improper tubeless tape job doesn’t result in a damaged rim.
- If the tubeless seal between tire’s air chamber and the rim’s cavity is breached, the rim’s cavity can become pressurized resulting in a pressurized rim and potential delamination of the rim’s sidewall. The Pressure Relief Valve Stem Nut prevents this from happening by creating an escape for the air via fluted reliefs on the inner diameter of the nut.
- Air escaping from these ports, indicates a compromised tubeless seal.
- Recommended for all tubeless SES wheelsets as well as other brand road tubeless wheelsets.
- Each order includes two nuts, enough for one wheelset.
$5.39 - $6.39
- Valve Type: Presta
- Valve Stem: Smooth
- Valve Core: Non-Removable
- Wall thickness: 0.9mm
$5.59
- Butyl rubber
- Economy tube
- Schrader valve
- Removable valve core
- Wall thickness: 0.9mm
$5.64 - $9.09
- Valve type: Schrader
- Valve core: Removable
- Butyl rubber
- Wall thickness: 0.9mm
$5.64
- Valve type: Schrader
- Valve core: Removable
- Butyl rubber
- Wall thickness: 0.9mm
$5.79
- Butyl rubber
- Removable valve core
- Schrader valve
- Wall thickness: 0.9mm
$5.95
- Shim adds support to Presta stem used in a Schrader rim
Page 1 of 49
Next page