Tires/Tubes

The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing. A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. Who Rides This Tire? Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain. Where Does This Tire Perform Best? Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails. Go Faster, Go Bigger The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity. For Downhill, Enduro, and trail Dominance Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions. Construction A dual-ply, 120TPI construction, the 2x120TPI casing is supple and fast rolling with improved traction while providing high levels of support Grip3 Compound Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear. Protection EN:Wall – A butyl layer located within the casing ply that provides defence to cut and abrasion as well as providing extra sidewall support.

- Ramped center knobs - High shoulder blocks - Available in two Plus sizes

The Maxxis Aspen is one of our premier XC race tires. A low center tread height allows the Aspen to roll quickly but substantial – for XC – side knobs provide cornering traction.

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Maxxis’ all-purpose road race tire receives a refresh for 2021 with a new lighter weight casing, upgraded puncture protection, and a revised tread pattern. The result is a lighter, faster, and more durable High Road.

With side knobs borrowed from the legendary Minion DHF, but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control.

With numerous race wins under its belt and untold miles of backroad adventures, the Rambler is our most popular gravel offering. Tightly-packed center knobs are ramped for rolling efficiency on hardpack roads and asphalt. The cornering knobs are spaced farther apart for control in variable conditions.

The Maxxis Welterweight tubes are 0.8mm thick and available with Presta or Schrader valves.

As the name implies, the Maxxis Wetscream is designed for the most heinous muddy downhill race conditions imaginable. The Wetscream is a competition use only tire and it is intended for wet conditions only.

- Tubeless-Easy with MicroSkin fabric for Gravel - OneStar compound helps to achieve an extremely low rolling resistance - The perfect tire for the latest gravel bike trend

- Unleashing profile and breathtakingly fast – especially when large volume counts. - As a 30-35mm wide road race version with V-Guard protection, G-One Speed is a tire for the real tough jobs. - It is also a guarantee for maximum speed in the extra-wide 50mm execution – of course not only at the fascinating beach races on Holland's coasts. - The new G-One Speed is an evolution of the former S-One and Big One.

LIGHTER, GRIPPIER, FASTER. The ‘turbo’ of spike tires. With up to 402 spikes it bites firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The tire remains agile and sporty. Brand new studded tires must be ridden around 40km on asphalt roads without heavy acceleration and braking. This 'bed-in period' will ensure studs are fully set, after which, the studded tires can be used normally. - Lighter, grippier, faster - The ''Turbo'' of spike tires - Agile and sporty - Please note, in order to ensure that spikes are permanently fixed, tires should be run in for about 40km (25 miles) on asphalt, while avoiding any fast acceleration or heavy braking.

Schwalbe's Marathon Racer offers excellent puncture protection in a fast-rolling, slick-tread tire. Their SpeedGrip rubber compound means great handling and long tread life, too.

- Specifically developed for the rear wheel, but will make a good front tire too - Very fast and versatile XC tread - Great traction - Excellent acceleration - Outstanding rolling properties - Addix Speed Compound: Speed, stability, and durability

TOP CHOICE FOR ROOKIES. Proven XC and All Mountain tread design. Just right for rougher trails. Perfect for the front wheel in combination with (e.g.) Rapid Rob. Available in the wheel sizes 26“, 27.5“ and 29“ as well as the super-wide 60 mm version (27.5“ x 2.35“). - Shoulder studs for great lateral traction. - Tread inspired by the Nobby Nic - K Guard puncture protection

50 hard wearing carbide tip studs clad in a galvanized steel base. Comes with tool for easy insertion. In order to ensure that spikes are permanently fixed, tires should be run in for about 40km on asphalt, while avoiding any fast acceleration or heavy braking.

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim

Type: Patch Cement Size: Individual tube

- Anodized alloy construction - Fits standard Schrader valves

- Plastic storage box - Contains 7 large patches cement, and scuffer

• Includes a plastic storage box, 6 patches, cement, and scuffer

- Forged alloy construction - Fits Schrader valves

Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.

- Includes 6 self-adhesive patches (25mm) and sand paper to scuff the tube surface for proper adhesion - Suitable for all kinds of punctures - Convenient plastic case is compact and easy to carry on every ride - No glue needed

Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher-quality tube will always last longer than a cheap tube during comparable everyday use.

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Shim adds support to Presta stem used in a Schrader rim

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm