Hubs
$219.99
- An oversized hub shell increases torsional and lateral stiffness
- 6902 bearings for maximum durability
- Wide bearing placement was designed to decrease load on the bearings
- Low-drag labyrinth seals
- Tool-free endcaps
- Torque-cap compatible
- Includes standard 15mm end-caps only, Torque must be purchased separately
$199.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6-degree engagement
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 37.71mm
- LTF-R: 50.81mm
- CTF-L: 36.44mm
- CTF-R: 23.34mm
$33.99
The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology.
- The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring
- Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life
$32.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling.
- Internal O-rings and grease sleeve
- High quality, sealed Cup & Cone Bearing
- High durability and smooth rolling for sustained performance
$45.39
• Aluminum hub body
• Sealed bearings
• 5/7-speed freewheel
• 32 and 36-hole spoke drilling
• Quick-release
• 126mm hub spacing
• Silver or black
$85.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world.
- Weight: Disc Brake: 164g
- Includes 12mm, 15mm endcaps and quick release skewer
- Non-Drive Side Center To Flange Disc Brake: 21mm
- Drive Side Center To Flange Disc Brake: 36mm
- Non-Drive Flange Diameter Disc Brake: 58mm
- Drive Side Flange Diameter Disc Brake: 45mm
$92.79 - $132.19
- Aluminum hub
- Sealed bearing
- Black
- 6-bolt disc brake rotor mount
$166.99
Featuring WTP's very own, patented 3-point clutch friction system, the Helix hub will take you backwards in style and hold up to any peg abuse that comes its way.
- Unique internal arrangement with face-bearing clutch stopper
- WTP Patented "Tri-Point" friction system
- Hub Drilling: 32
- Cassette Body Type: Single Cog Driver
- Axle Size: 14mm
- Spoke Interface: J-Bend
$90.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Fully convertible with tool-free end caps
- 24, 28 or 32 spoke holes
$149.99
The Box One Stealth Expert Front Hub is designed to be light FOR lightweight riders, and features small hub flanges, lower spoke counts, and decreased material to keep the weight down. This makes the Stealth Expert Front Hub ideal for any Mini, Junior, or Expert wheel build, but may also accommodate a lightweight rider looking to move up to a pro-sized bike.
FEATURES
- Micro-Adjust Pre-Load Collar
- Lightweight Design
IMPORTANT NOTES
Warning: The BMX spec is optimized for even lower drag with unsealed bearing. They are designed to be ridden in dry conditions. If ridden in wet conditions you will need to service the internals after each event or riding session.
COMPATIBILITY
- Box One XS Mini Carbon 1" Alloy Steerer 20" x 10mm Fork Black
- Box One XE Expert Carbon 1” Alloy Steerer 20” x 10mm Fork
- Box One 24x1-1/8" 28-Hole Front Rim Black
- Box One 20X 1-1/8" 28-Hole Rim Rear Black
$60.00
Track stars and fixed-gear converts will love Surly's Ultra New Front Hub. This gorgeous hunk of aluminum sports sealed bearings for all-weather reliability and low friction. And, the hollow axle is forged from flex-free chromoly for steering precision, long-lasting durability and simple quick-release compatibility.
$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
$436.90 - $465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
$223.90
The new standard for durability and price.
- Patented Star-Ratchet system
- Contact-free seals and high precision build guarantee smooth bearings
- Press-fit end caps allow tool-free maintenance and conversion
$285.00 - $311.00
Dependable Independence – Reliability, versatility, and simplicity are united in a hub.
Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36-tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence.
PRODUCT DETAILS:
- A DEPENDABLE HUB
The freehub Ratchet System makes the 350 the dependable partner for any ride
- NO TOOL CONCEPT
Plug-in hub construction allows for quick and tool-free maintenance
- NEW ENDCAPS
The new shape of the end caps facilitates disassembly and thus speeds up handling requiring disassembly
- VARIETY
The 350 hub is available for all common axle standards and for the various drivetrain systems.
TECHNOLOGY:
We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our in-house developed technologies.
LEGENDARY RELIABILITY:
The patented freewheel system, which features high-precision star ratchets, guarantees top performance and reliability.
The simultaneous engagement of the ratchet teeth makes the Ratchet System extremely reliable since the loads are distributed equally across a large contact surface.
$285.00 - $311.00
Dependable Independence – Reliability, versatility, and simplicity are united in a hub.
Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36-tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence.
PRODUCT DETAILS:
- A DEPENDABLE HUB
The freehub Ratchet System makes the 350 the dependable partner for any ride
- NO TOOL CONCEPT
Plug-in hub construction allows for quick and tool-free maintenance
- NEW ENDCAPS
The new shape of the end caps facilitates disassembly and thus speeds up handling requiring disassembly
- VARIETY
The 350 hub is available for all common axle standards and for the various drivetrain systems.
TECHNOLOGY:
We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our in-house developed technologies.
LEGENDARY RELIABILITY:
The patented freewheel system, which features high-precision star ratchets, guarantees top performance and reliability.
The simultaneous engagement of the ratchet teeth makes the Ratchet System extremely reliable since the loads are distributed equally across a large contact surface.
$285.00 - $311.00
Dependable Independence – Reliability, versatility, and simplicity are united in a hub.
The 350 hub is a dependable road mate for every adventure, whether on asphalt or gravel roads. A lightweight axle in combination with a milled hub body ensures a low weight while the proven Ratchet System with 36 teeth guarantees reliable power transmission. The plug-in construction allows maintenance of the freehub system without special tools and conversion to different standards - for maximum versatility.
PRODUCT DETAILS:
- A DEPENDABLE HUB
The freehub Ratchet System makes the 350 the dependable partner for any ride
- NO TOOL CONCEPT
Plug-in hub construction allows for quick and tool-free maintenance
- NEW ENDCAPS
The new shape of the end caps facilitates disassembly and thus speeds up handling requiring disassembly
- VARIETY
The 350 hub is available for all common axle standards and for the various drivetrain systems.
TECHNOLOGY:
We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our in-house developed technologies.
LEGENDARY RELIABILITY:
The patented freewheel system, which features high-precision star ratchets, guarantees top performance and reliability.
The simultaneous engagement of the ratchet teeth makes the Ratchet System extremely reliable since the loads are distributed equally across a large contact surface.
$285.00 - $311.00
Dependable Independence – Reliability, versatility, and simplicity are united in a hub.
Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36-tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence.
PRODUCT DETAILS:
- A DEPENDABLE HUB
The freehub Ratchet System makes the 350 the dependable partner for any ride
- NO TOOL CONCEPT
Plug-in hub construction allows for quick and tool-free maintenance
- NEW ENDCAPS
The new shape of the end caps facilitates disassembly and thus speeds up handling requiring disassembly
- VARIETY
The 350 hub is available for all common axle standards and for the various drivetrain systems.
TECHNOLOGY:
We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our in-house developed technologies.
LEGENDARY RELIABILITY:
The patented freewheel system, which features high-precision star ratchets, guarantees top performance and reliability.
The simultaneous engagement of the ratchet teeth makes the Ratchet System extremely reliable since the loads are distributed equally across a large contact surface.
$77.70
DT Swiss Sinc Ceramic cartridge bearings.
- The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$62.99
- High-quality road hub with 1-piece forged and CNC machined alloy body
- Sealed bearings for increased performance and contamination resistance
- 7075AL machined axle
Specifications:
- Use: FT
- Spacing / Axle: QR
- Material: Alloy
- Weight: 79g
- Brake Type: RIM
- Bearing Type: Sealed
$119.99
- Elite Series road hubs
- Straight pull and J-bend spoke options
- Sealed bearings
Straight Pull Spoke:
PCD-L: 30.3mm
PCD-R: 30.3mm
LTF-L: 13.1mm
LTF-R: 13.1mm
CTF-L: 36.9mm
CTF-R: 36.9mm
J-Bend Spoke:
PCD-L: 31mm
PCD-R: 31mm
LTF-L: 10.78mm
LTF-R: 10.78mm
CTF-L: 39.22mm
CTF-R: 39.22mm
$79.99
- Aluminum hub body
- Sealed bearings
- 6-bolt disc rotor mount
- 15mm thru axle
- 78 x 15mm version: flush axle, no end caps
$189.99
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec.
Same Clutch coaster hub you’ve come to love, but with a few upgrades.
Features:
- Maximum strength axle design
- Super-durable bearing arrangement throughout
- 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required.
- Super-durable drag mechanism design
- Crankflip ready
Improvements Over the Clutch V1:
- 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability
- Improved clutch engagement
- Improved manufacturing precision throughout
- More slack than the V1 hub
- All-new durable proprietary plastic spec for the removable hub guard
Specs:
- 36-hole, 2014-T6 aluminum shell
- 9T Driver
- Left or right hand drive
- 22 oz / 623g
Guard Options:
- Plastic hub guard included (but optional to use)
- Alloy hub guard also available
$56.99
Sealed cartridge bearing
High flange design w/cut outs
100mm OLD
Lightweight, hollow, heat-treated axle
Black, silver, or white
32 or 36-hole spoke drilling
$85.00
Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.
$70.00 - $75.00
Track stars and fixed-gear converts love Surly's Ultra New Track Rear Hub! This gorgeous hunk of aluminum boasts reliable sealed bearings, and your choice of fixed/fixed or fixed/free gearing. Plus, this hub's 120mm width fits most track frames and the flex-free solid axle is forged from rugged chromoly.
$269.99 - $299.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6-degree engagement
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
J-Bend/QR:
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 32.95mm
- LTF-R: 48.45mm
- CTF-L: 34.7mm
- CTF-R: 19.2mm
J-Bend/142 x 12mm:
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 36.45mm
- LTF-R: 51.95mm
- CTF-L: 34.7mm
- CTF-R: 19.2mm
Straight Pull/QR:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 36.2mm
- LTF-R: 50.1mm
- CTF-L: 31.45mm
- CTF-R: 17.55mm
Straight Pull/142 x 12mm:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 39.7mm
- LTF-R: 53.6mm
- CTF-L: 31.45mm
- CTF-R: 17.55mm
$189.99
The Shimano Alfine DH-UR705-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch Center Lock wheels and uses a 12 x 100mm E-THRU axle design.
- New internal unit construction is 28g lighter than DH-T8000-3D
- More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000
- Proper positioning with 12mm E-THRU
- Angular contact bearings
- Compact & lightweight
- Low rotational resistance
- Effortless setting of disc rotor
- Durable sealing performance
$127.49
- Aluminum hubs
- Sealed bearing
- Nutted
- Use: Rear 110mm
- Driver: Singlespeed cassette w/12T cog and lockring
- Axle: 3/8-inch
- Material: Alloy
- Brake Type: Rim
- OLD: 110mm
- Bearing Type: Sealed
- Drilling: 32
$101.99
- Heat-treated axle for improved strength
- Angled Flanges for lateral stability in wheel building
- Rear hubs include a 4-Pawl Cassette body with 9-tooth driver
- Use: Rear
- Driver: Singlespeed cassette w/9T cog and lockring
- Spacing / Axle: 14mm
- Material: Alloy
- Drilling: 48
$182.99
- Singlespeed freecoaster hubs with 9-tooth driver
- Sealed bearings
- Use: Rear
- Gears: Singlespeed w/ 9-tooth driver
- Drilling: 36
- Axle: 14mm
- OLD: 110mm
- Bearing Type: Sealed
$196.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement
- Straight pull and J-bend spoke options
- 6-bolt disc brake rotor compatible
- Sealed bearings
J-Bend SPECIFICATIONS
- OLD: 110mm
- Left Flange Diameter: 58mm
- Right Flange Diameter: 45mm
- Left Locknut-To-Flange: 27.05mm
- Right Locknut-To-Flange: 15.05mm
- Left Center-To-Flange: 27.95mm
- Right Center-To-Flange: 39.95mm
Straight-Pull SPECIFICATIONS
- OLD: 110mm
- Left Flange Diameter: 55mm
- Right Flange Diameter: 55mm
- Left Locknut-To-Flange: 31.5mm
- Right Locknut-To-Flange: 19.5mm
- Left Center-To-Flange: 23.5mm
- Right Center-To-Flange: 35.5mm
$174.99
The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels.
- New internal unit construction is 28g lighter than DH-T8000-3D
- More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000
- Angular contact bearings
- Compact & lightweight
- Low rotational resistance
- Durable sealing performance
$45.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-free 15mm thru axle system is stiff and lightweight
- Simple setup and reliable trail performance
$269.99
- Elite Series convertible road disc hubs
- Available in multiple axle configurations
- Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement
- Straight pull and J-bend spoke options
- 6 bolt and Center Lock disc brake rotor options
- Sealed bearings
- Material: AL6061
Straight Pull Spoke/QR Axle:
PCD-L: 35mm
PCD-R: 49mm
LTF-L: 32.75mm
LTF-R: 50.05mm
CTF-L: 34.9mm
CTF-R: 17.6mm
Straight Pull Spoke/12mm Thru-Axle:
PCD-L: 35mm
PCD-R: 49mm
LTF-L: 36.25mm
LTF-R: 53.55mm
CTF-L: 34.9mm
CTF-R: 17.6mm
J-Bend Spoke/QR Axle:
PCD-L: 45mm
PCD-R: 50.6mm
LTF-L: 32.65mm
LTF-R: 48.2mm
CTF-L: 35mm
CTF-R: 19.45mm
J-Bend Spoke/12mm Thru-Axle:
PCD-L: 45mm
PCD-R: 50.6mm
LTF-L: 36.15mm
LTF-R: 51.7mm
CTF-L: 35mm
CTF-R: 19.45mm
$69.99
• Sealed cartridge bearings
• High flange design
• 120mm hub spacing
• Lightweight, hollow, heat-treated axle
• Fix/fix hub threading
• 32 and 36-hole spoke drilling
• Bolt-on 3/8-inch axle
• Black, silver, and white
$124.39 - $135.19
- Centerlock, 11-speed compatible road hubs
- Sealed bearings keep out contamination and dirt while providing a smooth rotation
- Skewer included
$459.99
Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub.
- Center Lock Disc Rotor Compatible
$225.00
Whether the goal is a finish line, epic adventure or simply getting back home again, our new 900 hubs are ready for the challenge. On the inside, our smooth and durable DOUBLE TIME drive mechanism ensures rapid lightning-fast engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Includes Quick Release & 12x142mm Through AxleCaps
- Fully convertible with tool free end caps
- DOUBLE TIME mechanism offers smooth,quick and durable engagement
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Axle type: Conversion Caps included
- Spoke holes: 24
- Brake compatibility: Disc (6-bolt)
- Driver Mechanism: Double Time - Four Pawl
- Axle material: Tapered aluminum
- Driver body material: Aluminum
- Hub shell: Aluminum - Seeker angled flanges - Oversized body
$139.99
- Aluminum alloy shells resist corrosion and provide lightweight longevity
- Sealed cartridge bearings offer smooth operation while resisting contaminants
- Thru axle design with 8-10 speed cassette and XD drivetrain options
- Brake Type: 6B
$225.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Fully convertible with tool-free end caps
- BOOST variants
- 24, 28 or 32 spoke holes
$223.90
The new standard for durability and price.
- Patented Star-Ratchet system
- Contact-free seals and high precision build guarantee smooth bearings
- Press-fit end caps allow tool-free maintenance and conversion
$108.38
Hope Pro2 Evo Freehub Bodies
· Not compatible with Hope Pro2
$32.29
Hope Front Axle Conversion Kits
· Compatible with Pro 2 and Pro 2 Evo hubs
$229.90
The number to count on—240 with Ratchet EXP.
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement (which reduces wear), and a smaller number of parts not only makes maintenance easier, but also reduces weight.
$76.90
Direct power meets simplicity—running smoothly day-in and day-out.
The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
$465.90
Direct power transmission in every riding situation—240 with Ratchet EXP.
With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
$714.90
Aluminum rear hub for bicycle - 18P DBCL 24 holes, straightpull, black. Aluminum Campagnolo freehub body, black.
- Dimension: 12x142mm
$76.90
The value-packed DT Swiss 350s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.
$58.99
• Aluminum hub body
• Quick release
• 100mm OLD
• 20, 24, 28, 32, and 36-hole spoke drilling
• Black or Silver
$69.99
• Sealed cartridge bearings
• High flange design
• 120mm hub spacing
• Aluminum hub body
• Lightweight, hollow, heat-treated axle
• Fix/freewheel hub threading
• 32 and 26-hole spoke drilling
• Bolt-on 3/8-inch axle
• Black, silver, or white
$31.99
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts.
- Double contact sealing
- Super polished bearing races for low friction rolling
- 6-bolt ISO disc mounting surface
$249.99
- Elite Series road hubs
- Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement
- Straight pull and J-bend spoke options
- Sealed bearings
- Material: AL6061
- Brake Type: Rim
- OLD: 130mm
Straight Pull Spoke:
PCD-L: 32mm
PCD-R: 52.5mm
LTF-L: 27.7mm
LTF-R: 50.8mm
CTF-L: 37.45mm
CTF-R: 14.35mm
J-Bend Spoke:
PCD-L: 38.5mm
PCD-R: 50.6mm
LTF-L: 27.45mm
LTF-R: 49.05mm
CTF-L: 37.7mm
CTF-R: 16.1mm
$165.99
- Elite Series convertible fat bike hubs
- Available in multiple axle configurations
- J-bend spoke compatible
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Bearing: Sealed
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 27.65mm
Quick Release:
- Weight: 246g
- LTF-R: 24.85mm
- CTF-L: 39.85mm
- CTF-R: 42.65mm
15mm Thru-Axle:
- Weight: 256g
- LTF-R: 27.65mm
- CTF-L: 47.35mm
- CTF-R: 47.35mm
$259.99 - $269.99
- Elite Series convertible fat bike hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement
- J-bend spoke compatible
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- PCD-L: 58mm
- PCD-R: 58mm
Quick-Release:
- LTF-L: 48.65mm
- LTF-R: 48.65mm
- CTF-L: 36.5mm
- CTF-R: 36.5mm
12mm Thru-Axle:
- LTF-L: 52.15mm
- LTF-R: 52.15mm
- CTF-L: 46.5mm
- CTF-R: 46.5mm
$338.00 - $364.00
Dependable Independence – Reliability, versatility, and simplicity are united in a hub.
Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36-tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence.
PRODUCT DETAILS:
- A DEPENDABLE HUB
The freehub Ratchet System makes the 350 the dependable partner for any ride
- NO TOOL CONCEPT
Plug-in hub construction allows for quick and tool-free maintenance
- NEW ENDCAPS
The new shape of the end caps facilitates disassembly and thus speeds up handling requiring disassembly
- VARIETY
The 350 hub is available for all common axle standards and for the various drivetrain systems.
TECHNOLOGY:
We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our in-house developed technologies.
LEGENDARY RELIABILITY:
The patented freewheel system, which features high-precision star ratchets, guarantees top performance and reliability.
The simultaneous engagement of the ratchet teeth makes the Ratchet System extremely reliable since the loads are distributed equally across a large contact surface.
Page 1 of 3
Next page