Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

iSSi Keo Compatible Cleat
$29.99
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install
Shimano SM-SH51 SPD Cleat Set
$19.99
Shimano's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
Shimano SPD-SL Cleat Set
$34.99
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes. - 0° Float/fixed type = SM-SH10 - 2° Float/front center pivoting type = SM-SH12 - 6° Float = SM-SH11
Problem Solvers Deckster Clipless Pedal Adapter
$39.99
Problem Solvers Deckster pedal adapters. Converts SPD-compatible pedals to platform pedals for casual cruising. • Works with 2-bolt, SPD-style cleats, such as Time, Shimano, Crank Brothers, Wellgo and others. Not compatible with Speedplay • Cleats not included • 85 x 95 x 10mm platform • Hardware included, cleats not included
Garmin Vector 2 Replacement Pedal Pod
$79.99
Garmin's Vector 2 Replacement Pedal Pod replaces your old worn-out one for accurate power measurement and countless miles of more riding. - Standard: fits crank arms 15-18mm thick and up to 44mm wide - Large: fits crank arms 12-15mm thick and up to 44mm wide - ANT+ transmitter - User-replaceable battery (2032 coin cell) - 175 hours of active cycling operation - Compatible with Vector 2 and Vector S2 - Replacing a pedal pod does not impact Vector power or cadence accuracy - Single pod only
Crank Brothers Premium MTB Cleats
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees
iSSi Spindle Rebuild Kit
$50.00 - $52.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps
iSSi Thump Replaceable Pin Kit
$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
Wheels Manufacturing Inc. Pedal Washers
$10.75 - $19.95
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
VP Components VP-ARC6 Split Cleats
$22.00
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float). - Fits VP and Look Keo pedals (pedals sold separately)
Time ATAC Cleat
$22.00
- The ATAC 13/17° cleat works with all TIME mountain pedals. - Included with all mountain pedal models numbered "6" and higher - Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe - Compatible with all two-hole cycling shoes.
Time ICLIC Fixed Cleat
$22.00
- Works with all XPRO and XPRESSO pedals. - Not included with new XPRO and XPRESSO pedals. - This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
Sunlite ATB Toe Clips and Straps
$13.99
- Nylon clips - Woven straps - For ATB or hybrid use
Sunlite FlatForm II Exerciser Pedal Straps
$9.09
Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm
Sunlite Pedal Blocks
$16.39
- Fits most platform pedals - Two wooden riser blocks w/durable rubber band - Adds 3/4" to each side (1-1/2" total)
Sunlite Pedal Extenders
$29.99
- Extends pedals - Not for use on exercise bikes
Sunlite Pro MTB SPD Pedal Cleats
$19.99
- Fits most MTB shoes - For clipless SPD-style pedals - 4-degree float
Spank 2015 Pedal Replacement Bearing Kit B
$21.99
- Compatible with all Spike & Oozy Pedals - Full Complement Sealed Bearing x 2pcs - Green Silicone Friction Seals - Replacement inboard bearings for your SPIKE or OOZY pedals.
Spank Pedal Axle Rebuild Kit
$45.99
Pedal Axle Rebuild Kit for SPIKE & OOZY Trail Pedals - 1 set L&R axle - 2pcs IGUS bushing - 2pcs O-ring - 2pcs dust cap - 2pcs stainless shim washer - 2pcs silicone friction seal - 2pcs lock nut
Spank Pedals 7mm Short Pin Kit
$8.99
Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals. - Provide durability and improved safety - Mix and match with the longer stock pins to customize your ideal amount of grip
Spank Spike/Oozy/Spoon Pedal Pin Kit
$9.99
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness. - 28pcs rear load pins - 16pcs front load pins - Tool included
Spank Spoon Pedal Axle Rebuild Kit
$45.99
The Spoon Pedal Axle Rebuild kit includes the internal parts required to completely rebuild a set of Spoon pedals. - Pins available separately
Shimano Shimano SH45 SPD-SL Cleats Covers
$17.99
- Fits SPD-SL cleats - Cleat Bolt Pattern: 3-Bolt
Race Face Aeffect Pedal Rebuild Kit
$24.99
Rebuild kit for Race Face Aeffect pedals.
Race Face Atlas Pedal Bearing Rebuild Kit
$49.99
Bearing rebuild kit for Race Face Atlas pedals.
Race Face Atlas/Aeffect Pedal Pin Kit
$12.99
Replacement pin set for Race Face Atlas and Aeffect pedals.
Race Face Chester Pedal Pin Kit
$9.99
RaceFace Chester Pedal Pin Kit 20 Pins Black
Race Face Chester Pedal Rebuild Kit
$26.49
RaceFace Chester Pedal Rebuild Kit
Race Face Chester Pedal Spindle Kit
$27.99
RaceFace Chester Pedal Spindle Kit Left/Right
Origin8 Look Delta Cleats
$20.99
Origin-8's Look Delta Cleats are compatible with Look Delta-style pedals. - These cleats use the Look/SPD-SL bolt pattern.
Page 1 of 2 Next page