- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
Replacement bearing for the lower half of YST8003 #7 headset.
Replace the top bearing in your YST8300 headset with these caged ball bearings.
RaceFace X-Type Bottom Bracket Outer Race Seal - Replacement for cracked or broken X-Type outer race seals - Sold each
- w/Nut - 1-3/4-inch
- 8x1mm Allen head
- Model: Replacement bolt - Compatibility: Allen, M5x16
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
$1.00 - $36.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
- Aluminum w/lock nut - 18mm long/6mm O.D.
- Replacement cable anchor bolt for brakes - Includes nut and washer
- Aluminum w/lock nut and mount - Slotted mount design
- M8 Top Plate Bolt
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
- For MTB levers - 7mm x 1mm - Aluminum construction
- Routes cables underneath the bottom bracket - Will not rust or corrode
Stainless steel pedal washers - Sold in pairs
- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag
- One-piece steel construction - Chrome plated
- M8 Top Plate Nut
- Rubber - Color: Black
- Standard steel replacement
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
- Steel star nuts for anchoring headset compression in steel or alloy steerer tubes
The Gyro G3 upper top plate is designed for use with the G3 detangler.
Standard replacement star nuts for threadless steerers.
- Includes everything needed to mount non-threaded brake pads to cantilever brake arms
• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm
Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.
Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag
- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
Shimano E-tube Dummy Plugs - Extra E-Tube plugs for sealing unused ports on shifters or junction boxes - Sold each
Shimano Front Derailleur Cable Fixing Assembly
Replacement bolt for Surly Constrictor seatpost clamp. - Size: 8mm
- Chrome allen seat binder bolt
- Color: Black - Length: 8.5 mm - Material: Steel - Type: Hex - Includes: 4 bolts & 4 nuts
Strain relief for servicing RockShox Reverb hydraulic lines. - Fits all generations of Reverb
- Replacement retainer bearings for an assortment of applications
Weight-savings is no excuse to have an ill-fitting cockpit. Shave every possible gram with these Carbon Headset Spacers from FSA, and ensure your bike fit is right on the money.
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt
The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA
The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.
Chrome plated heat treated bolt - Forged steel conical wedge - For 1-inch steer tubes
Threaded headset keyed locknut washer - Bag of 10
$3.99 - $11.99
Connecting links for Origin8 chains
- Cartridge Bearing - 1-3/8-inch Outer Diameter
- Axle mount rear derailleur guard - Essential for children`s multi-speed bikes
$3.99 - $19.99
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact - Includes mounting bolt
Replacement LH cup for English threaded European bottom brackets. - Cup Material: Steel
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut
Shimano Rear Derailleur Cable Anchor Assembly - Fits SLX M7000-10
A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use. - Fits all generations of Reverb and Reverb Stealth - Brass Key sizes are defined by the number of lines on the key. (Zero lines means a "Size 0" key, 3 lines means a "Size 3" key.)
$4.25 - $6.59
- Super light carbon spacers for tuning stem height - Spacers are internally weight relieved to drop a few extra grams
- Fits Shimano and ISIS BBs - 16mm ID x 20mm OD x 1.5mm Thick - Bag of 10
The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.
Page 1 of 15 Next page