Filter By:
- Parts & Accessories (113)
- Cranksets (212)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Cranksets
$11.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Compatible with:
- Race Face
- Next SL Cinch (G3)
- Sixc Cinch
- Chester
- Respond
- Next/Next SL (24mm Spindle)
- Sixc (24mm Spindle)
- Most other popular carbon MTB cranks and assorted alloy DH cranks
$11.99
Race Face Crank Arm Tab Spacers
• Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used
• Fits all Race Face cranksets
• Use double bolts
$11.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
$11.99
- Material: Heat-treated 4130 Chromoly
- Splines: 8
- Diameter: 19mm
- Length: 5.7/8" (150mm)
- Spindle Bolts: 8x1mm (Included)
- Compatibility: Fits Stolen OEM/MOB/SIC Mission Transit, Rant 8-S, Sunday Saker and most other 19mm, 8 spline cranks
$12.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.
- For Descendant Carbon and non-Eagle XX1 and X01
$12.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact.
- Injection molded plastic crank arm protection
- Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes
- Material: Injection molded plastic
- Recommended Group: XX1, X01, XX, X0
$12.00
TruVativ Crank Arm Fixing Bolts
- Monocoque carbon crankset with hollow-arm design
- FSA Mega Tooth chainring design greatly improves chain retention
- FSA BB392 compatibility allows use in nearly any frame
- Bottom bracket not included
$12.95
- Lower slider replacement parts for E-13 chainguides
$12.99
Spacers to insure proper chainline and chainring spacing on your bike.
• 0.6mm thick
• Sold in a bag of 20 spacers
$13.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms
- Sold as singles
$13.99
Crank arm tip protectors for Origin8 Thruster Crank Arm Tip Protectors fit all Thruster Series MTB, Boost, and Fat cranksets. Grab a pair to protect your crank arm tips from abrasions and impacts.
$14.99
Race Face Crank Arm Fixing Bolts
- M18 Crank Bolt
- Fits 15SX/Atlas/SixC CINCH
- Not self-extracting
$17.00
- Octalink bolts include steel washers, JIS includes black plastic caps
- HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm
- Hollow bolts (SH-21504) not recommended for non-treated spindles
$17.95
- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets
$18.99 - $26.99
• Square taper interface
• Only includes left crank
$19.99
- Asymmetric four arm shape for greater stiffness in the power zones of the pedal stroke
- Compatible with 9/10/11 speed chains, mounts using a common Park BBT-22 tool
$19.99 - $23.99
• Forged steel
• Square taper
• Compatible with 9/16" pedals
• Pairs
• Cotterless
$21.00
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications
- CNC-machined aluminum with three steel connecting bolts to prevent independent rotation
$21.99
• Square taper interface
• Only includes left crank
• 175mm length
$22.00
- Enables the use of various cranks with BB386EVO PF30 or BB30 bottom brackets
- Spacers and adapters only specific bottom brackets are required and sold separately
- Spindle Interface: SRAM GXP
$22.05
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
$23.99 - $49.99
The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain.
- Precision indexed shifting
- 8/7/6-speed compatible
- 3 crank length specification available
- Precise chain line control
- Light and reliable shifting
- Versatile performance
- Wide compatibility with multiple components
- Quick and precise assembly
$23.99
- Universal bottom bracket style mount
- 44T maximum chainring size
- Impact-resistant plastic
- Size: Universal
- Application: BB Mount
$24.99
Fits 19mm team & talon cranks:
- Splines: 48
- Diameter 19mm
- Length: 5.5" (140mm)
- Spindle bolts: 3/8" X24tpi (not included)
- Also fits: Cult OS, Demolition Revolt, Rant 48-S, WTP Royal, Redline Device and other 19mm 48 spline cranks
$25.99
• 6061-T6 aluminum construction
• Adapts 110 or 130 bcd 5-bolt chainrings to fit one-piece or three-piece single bolt cranks
• Anodized finish
• Made in the U.S.A.
$26.99
- FC-TY501-2 double crankset for 7 and 8 speed drivetrains
- Simpler and faster shifting than triple cranks
- 46-30 gearing, ideal for gravel, adventure, commuting & light touring
- 48.8mm chainline, designed for 135mm QR and 142mm thru-axle frames
- Crank bolts included
- Requires LL123 square taper bottom bracket
$28.99
FSA die cast alloy crank arms for Bosh Gen3 systems.
- Bosch Spindle Interface (BNI)
- Great way to shed weight over stock steel arms
- Subtle graphics
- Sleek Styling
$28.99
FSA JIS Square Taper eBike replacement crankarms.
Note: Spindle bore orientation varies with crank arm length
- 155mm arms have diamond spindle bore orientation with sides at 45° angles to the crank arm
- 170 & 175mm arms have square spindle bore orientation with sides parallel to the crank arm
$29.95
CAMO Spider
- Made from Aluminum alloy for light weight
- Includes 5 black chainring bolts
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
$29.99
Various parts for repair and replacement on Odyssey cranks.
$31.99
- 7/8SPD
- Square-taper
- 42-34-23T
- Steel
- 50mm Chainline
- 974G (175mm)
- Integrated Chain Guard
$32.99
- Horizontal square interface
- Only includes left crank
$33.00
- Enables the use of various cranks with BB386EVO PF30 or BB30 bottom brackets
- Spacers and adapters only specific bottom brackets are required and sold separately
$34.99
• 6/7/8-speed MTB crankset
• Square taper interface
• Coated steel arms/riveted steel chainrings
• Includes plastic chainguard
• Does not include BB
• Weight: 1465 grams
$35.99
With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind.
- 7075 Aluminum thread ring
- 7075 Aluminum preload spacer adjuster
- Grade 5 Titanium 2.5mm hex fastening bolt
- Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles
$39.99
- One-piece chromoly crankset
- 24TPI
- Length: 175mm
- Weight: 997g
$39.99 - $55.99
• Singlespeed crankset
• Alloy crankarms w/ solid steel chainring
• Square taper interface
• Does not include BB
$39.99
• ISIS interface
• Only includes left crank
• 175mm length
$39.99
• 8-speed Road crankset
• Square taper interface
• Does not include BB
• 1300 grams
$41.99
Forged AL6061-T6 alloy spiders for Origin8 Thruster Series modular cranksets
- SRAM 3-bolt interface for crank arm mounting
- Available in both single and double chainring configurations for MTB, Boost/Fat, and Road/Cross/Gravel applications
- BCD: 104mm 4-Bolt
- Type: 1x
$42.99 - $59.99
- 8-speed Road crankset
- Square taper interface
- Does not include BB
- Bolt pattern: 110 x 5-bolt
- Crank length: 170mm
$43.99
Kick your mountain biking into gear with the performance and durability of an Alivio MT210 crankset.
- High-quality anodized finish
- Precise and reliable shifting
$43.99
- Non-series FC-MT210-2 / MT210-B2 double crankset for 2 x 9 speed drivetrains
- Shimano's most affordable, outboard bearing Hollowtech II cranks
- Simpler and faster shifting than triple cranks
- 22-36 gearing, perfect for trail riding
- Chainline: 48.8mm chainline (FC-MT210-2), for 135mm/142mm frames, or 51.8mm (FC-MT210-B2), for Boost 141mm/148mm frames
- Aluminum crank arms
- Highly durable riveted steel chainrings
- Requires SM-BB52 bottom bracket, not included
$44.99
- AL6061-T6 crank with steel chainrings
- 7/8sp compatible
- 177mm Q-factor
- 48.5mm chainline
$44.99
- AL6061-T6 crank with steel chainrings
- 7/8sp compatible
- 177mm Q-factor
- 48.5mm chainline
- Spindle Type: 120 SQR JIS
$44.99
- Steel chainring with forged alloy crank arms and double chainguard
- Compatible with 3/32" chains
- 45mm chainline
- Spindle Type: 118 SQR JIS
$47.00
SRAM Force crank spiders are for repairing your crank or converting it to different gearing. Available in 110mm and 130mm BCDs.
$48.99
- Steel chainring with forged alloy crank arms and chainguard
- Compatible with 3/32" chains
- Riveted chainring
- Spindle Type: 118 SQR JIS
- Bolt Pattern: Riveted
- Speed: 1
$49.99
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame
- Road sets include bearings, shields and a wavy washer
- Mountain sets include bearings, shields and a spacer
- Choose ceramic or stainless steel options
Page 1 of 6
Next page